Audio Innovations

Car Stereos, Auto Customizing, Mobile Electronics

1105 Jim's Lane, Conway, AR 72032 501-358-6545
  • Home
  • Services
    • Car Audio
    • Driver Safety Systems
    • Marine Audio
    • Motorcycle Audio
    • Radar and Laser Detector Systems
    • Remote Starters
  • About Us
  • Location
  • Customer Reviews
  • Contact Us
  • Facebook
  • Instagram

Product Spotlight: Momento R1 Rearview Mirror

Momento R1 Rearview MirrorDid you know that about 25% of accidents take place while a vehicle is in reverse? To reduce the chances of injury or accidents, Firstech — maker of Momento in-car camera solutions — has recently introduced a complete backup safety solution. The heart of this solution is the Momento R1 rearview mirror. Let’s look at how the Momento backup camera and safety system can help prevent accidents and reduce driver anxiety in a crowded parking lot.

Momento R1 Backup Camera Mirror

Momento R1 Rearview MirrorThe R1 is a 10.5 by 3.2-inch mirror designed to equal the quality, performance and reliability of a factory-installed mirror. During normal use, the mirror works just like the mirror that came with your car or truck. When the mirror detects a video signal from a camera, a 4.3-inch 480 x 272 pixel screen on the left side of the mirror displays the image. The screen is visible through the reflective coating, allowing you to see the camera image clearly, even in bright sunlight. The R1 includes a built-in light sensor that adjusts the display brightness to compensate for day and night operation.

Dual Camera Inputs

The R1 mirror includes two camera inputs. Rearview cameras and a forward-facing parking camera are the most common applications for the R1. Cargo cameras or blind spot monitoring solutions are also popular. In the case of a backup camera, your installer will integrate the camera with your vehicle, so the image displays when you put the transmission in reverse. A backup camera is a great feature for new drivers and makes parallel parking and backing up much easier and safer.

The R1 includes three control buttons on the right side of the screen. The center button gives you access to color, brightness and contrast menus. Giving the center button a quick tap displays the front (Video Input 1) image for 10 seconds. Buttons above and below the center button allow for adjusting the image display settings.

Momento designed the R1 system to be compatible with a wide variety of applications. The kit includes four mounting adapters and the R1 carries a three-year warranty. This installation flexibility means that you don’t need to purchase a new vehicle to enjoy the benefits of a backup camera system. Your local mobile enhancement retailer can upgrade almost any vehicle using Momento products.

Camera Solutions from Firstech

Firstech offers three universal camera solutions. The C1 (MR-C100) Backup Cam is an angled, surface-mount camera that provides a 170-degree field of vision. The camera mounts into a round hole and points down and rearward at a 45-degree angle to display everything in front of, or behind the vehicle.

The C2 (MR-C200) camera is a bullet-style camera that is designed for flush- or surface-mount solutions. The camera includes a keyhole mount and a bracket that can be angled for a variety of applications.

Momento R1 Rearview MirrorFinally, the C3 (MR-C300) camera includes six high-intensity LEDs that light up everything in its field of vision. The C3 kit also includes a license plate mounting bracket to make installation easier for your technician. This camera is perfect for applications when the reverse lights on the vehicle aren’t very bright or for use inside cargo vans or compartments where additional lighting may be required.

All three cameras feature an IP68 water intrusion rating, so you know they will withstand Mother Nature and car washes. If you are using these universal cameras with the R1 and their integrated adjustable parking lines, your technician can disable the parking line image built into the camera itself by cutting a wire loop during installation. All three cameras are configurable for normal or reverse-image display, so they can be used on the front or rear of the vehicle, and feature a standard composite video output for use with almost any display. Each of the three cameras also features a one-year warranty.

Momento S1 Parking Sensors

Momento R1 Rearview MirrorMomento’s S1 (MR-S100) parking sensor system is a great addition to the R1 mirror. The S1 system includes four ultrasonic proximity sensors and a compact speaker that produces beeps as you approach an object. Slow beeping commences at a distance of 6.7 feet. When you are less than 3.5 feet away, the beeps occur twice as often. Finally, at 1.3 feet away from an object, the beeps double in speed again to let you know you need to stop. The S1 system provides alerts automatically, rather than requiring you to remember to look at a display for improved safety. Many luxury vehicles include a backup camera and parking sensors for maximum protection.

Park and Maneuver Safely

The number of back-over accidents that take place each week in North America is stunning. Having a backup camera system like the Momento R1, in combination with the C1, C2 or C3 cameras and the S1 parking sensor system, will dramatically reduce the chance of an accident, injury and damage to your vehicle. A backup camera is a great addition to any vehicle and is especially beneficial on a truck, Jeep or SUV where rearward visibility is severely restricted. For more information about any of the Momento safety products, give us a call today!
This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: Backup Safety, PRODUCTS, RESOURCE LIBRARY Tagged With: Momento

Apple CarPlay Explained

Apple CarPlay

According to a AAA survey, the average American drives for about 45 minutes each day. If you compare this time to an eight hour work day, that’s 10% of your work day, on top of the hours you are at your desk. This time is not an insignificant number. If your job involves being on the road, then your time spent behind the wheel can represent half of your day. Being able to be productive while in your vehicle is not only convenient, but in some cases, mandatory to get all the work you need to get done in one day completed. Modern smartphone integration comes to the rescue with Apple CarPlay.

Apple CarPlay History

Apple recognized the need to give people the ability to use their phones in a safe fashion while driving back in 2010. The feature was called iPod Out. BMW announced that it would include iPod Out at the WWDC that year. The concept was that BMW would provide a way for its vehicles to ‘host’ specific applications. The information would be displayed on the factory screen while providing button press and knob rotation information back to the radio.

Apple CarPlayThe next evolution was the introduction of Siri Eyes Free in some Honda Accord and the Acura RDX and ILX models in 2013. Siri Eyes Free is a way to make use of the Siri voice recognition function that Apple Introduced with iOS 5 and the iPhone 4S in October 2011. Apple has marketed Siri as a personal assistant. It allows you to talk to your Apple device to make phone calls, send text messages, set reminders and choose the music you want to hear. Using Siri Eyes Free is simple- press and hold a button on your car radio, wait for the tone, and then speak.

Siri will listen to what you said, convert that to a command and execute it, all without you needing to take your eyes off the road.

Between the time that Apple announced iPod Out and the Geneva Motor Show in March of 2014, Apple was working on the next generation of automotive integration under the code name Stark. At the Geneva Motor Show, they announced ‘iOS in the Car.’ Later that year, Ferrari introduced the new FF model with a fully working version of Apple CarPlay. A few months later, Hyundai announced the Sonata would also feature CarPlay. Most automobile manufacturers have CarPlay available on their mid to high trim level vehicles now.

Apple CarPlay Interface Overview

Apple CarPlay
CarPlay alerts you to new text messages and will read them to you.

Apple’s current marketing touts CarPlay as ‘The Ultimate Copilot.’ The features are designed to allow you to communicate with family, friends, and coworkers without significant distraction. The basic feature set of CarPlay includes making and receiving phone calls, choosing the music you want to listen to, getting navigation instructions and sending and receiving text messages.

Apple has worked hard to ensure that the above functions are usable without unnecessary distraction. As soon as you plug your phone into the USB port of your radio, CarPlay launches automatically.

CarPlay does not display incoming text messages on the screen of the radio. Messages are read aloud to prevent users from looking at the dash. However, there are no options presented when asking Apple Maps to plan a navigation route.

Apple CarPlay
Voice command of music selection keeps driving and listening safe.

Selecting music to play is as easy as requesting the track title, artist or even genre of music you want to enjoy. CarPlay will start playing what you want right away. Apple has also included support for Apple Music- a streaming service powered by iTunes. CarPlay also supports Apple Podcast and Audiobooks. You can select the episode you want to listen to via the touchscreen interface, then play, pause or skip 15 seconds forward or back. Apple CarPlay provides support for several third-party applications including Pandora, Spotify, iHeartRadio, Audible and MLB At Bat.

Apple has released information to application developers in order to allow for the creation of more third party applications. You will see more and more third-party applications added to the CarPlay interface as time passes. Apple will, of course, be selective in their approval process, so don’t expect to see competing navigation applications any time soon.

The Future of Apple CarPlay

Apple CarPlayUnveiled by BMW in October of 2016, future iterations of CarPlay will function wirelessly. The 2017 BMW 5-Series sedans, when used with an iPhone 6 or newer, will allow users to use CarPlay without the need to plug in the Lightning connector. Wireless CarPlay communicates over a Bluetooth data connection.

Apple is tight-lipped about future functionality of CarPlay. There have been rumours about vehicle function control like remote door lock control, remote starting and trunk release, but so far nothing is set in stone. Another rumored feature is the ability of your phone to remember where you parked your car once you have arrived at your destination.

Apple has led the industry with safe and convenient integration of your smartphone to your vehicle. The future of ‘connected cars’ promises to allow us to share information and offer better communication while remaining safe. If you are interested in adding CarPlay to your vehicle, visit your local mobile electronics specialist retailer. They can show you what options are available for your vehicle.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

Product Spotlight: Sony XM-GS6DSP

Sony XM-GS6DSPSony introduced its new six-channel XM-GS6DSP amplifier at the 2018 Consumer Electronics Show. This amplifier is targeted at OEM integration and upgrade solutions. It delivers up to 45 watts of power from its four main channels and up to 600 watts from the pair of subwoofer channels. This amp combines easy-to-use analog crossovers and integrated digital signal processing for time correction and equalization to proficient installers to create an impressive listening experience.

Ultra-Efficient, High-Power Amplification

Sony XM-GS6DSPMost factory-installed source units only provide 18 to 20 watts of power. The XM-GS6DSP will serve up 45 watts of power from its four main channels to give your music an extra kick. This power level is the perfect complement to factory-installed speakers or an upgrade like the Sony XS-GS1621C 6.5-inch two-way components we highlighted in 2017 or the new XS-GS1631C 3-way component set. The subwoofer channels of the amplifier provide 90 watts of power per channel into 4 ohms and are bridgeable into a 2-ohm load to provide an impressive 600 watts of power. All power specifications are compliant with the CTA-2006 standard and represent measurements taken at no more than 1 percent distortion using a 14.4V power supply.

Signal Processing Features

Sony XM-GS6DSPThe XM-GS6DSP includes dedicated six-channel preamp and speaker level input connections on Molex plugs. The preamp input will accept up to 6V of signal and the speaker-level inputs will take as much as 12 volts. The tweeter/front channels include an optional high-pass filter that is adjustable from 500Hz to 4kHz. The mid/rear channels include a 50 to 500 Hz high-pass filter and a 500 to 4kHz low-pass filter. A three-position switch allows for full range, high-pass or high- plus low-pass operation. Finally, the woofer/subwoofer channels include an optional 50 to 500Hz low-pass filter and an adjustable bass-boost circuit that adds up to 10dB of boost. The woofer/subwoofer channel is rated to play from 20Hz to 10kHz.

Sony XM-GS6DSPThe onboard DSP processor is accessible by a Bluetooth connection from your smartphone using the Sony | Music Center application. The application allows your installer to fine-tune the 4.1-channel signal delay and fader/balance controls to adjust the output of each channel to provide accurate staging and imaging in your vehicle. A 10-band equalizer is yet another tool available to improve the performance of the system. The subwoofer level control is also adjustable from your smartphone, so you can fine-tune your system for the specific track you are enjoying.

As with many Sony | Music Center-compatible devices, you can stream high-resolution audio directly from your smartphone to the amplifier. This feature eliminates the necessity to upgrade your head unit to achieve stunning sonic performance.

Elegant and Compact Design

Sony XM-GS6DSPThe Sony XM-GS6DSP measures a mere 11.6 by 7.85 inches and is 2 inches thick, which is perfect for installation under a seat or behind a panel in the trunk. All of the connections and controls are along a single side of the amp, making it easy to install and configure. The power terminals will accept 4 AWG spade connections, and the subwoofer channels can handle 12 AWG spades without any problem.

Internally, the amp uses dedicated power supplies for the subwoofer channels and the four main channels. Large, high-quality capacitors provide energy storage for each section of the amp. The Class-D output stage uses surface-mount switching devices clamped between the circuit board and the top of the heat sink. Large, square conductor inductors and premium quality capacitors on each main channel help to ensure that radio reception won’t be affected when the amp is working hard.

Unique Applications

Sony XM-GS6DSPAs mentioned, the XM-GS6DSP is an ideal amplifier for most OEM upgrade solutions. You can power a set of front and rear speakers from the main channels, then add a subwoofer to enhance low-frequency output. Alternatively, in a three-way configuration, the flexible crossovers afford you the choice of a two-way front stage using a set of woofers and tweeters, or you can build a three-way stage using passive filters between the midrange drivers and the tweeters. The latter is a nice upgrade that provides excellent musical clarity and stage height in your vehicle. If you don’t want a subwoofer, but still have room for a 3-way front stage, the extended frequency range capabilities of the woofer/subwoofer channels can be used to power six speakers in a fully active configuration. Adding a second amp, rear speakers and a subwoofer would make for a stunning listening experience.

The Sony XM-GS6DSP is an amplification solution that will provide everyone from the most casual of listeners to discerning enthusiasts with an impressive performance. The combination of analog filters and digital processing maximizes the feature-to-cost ratio to provide a hard-to-beat solution that is suitable for a wide variety of applications. If you are in the market for an amplifier for your system, drop by your local authorized Sony dealer and ask for a demonstration of the XM-GS6DSP today. It will be well worth your time.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: Car Audio, PRODUCTS, RESOURCE LIBRARY

Vehicle Parking Safety Systems

Parking SafetyDid you ever wish you had eyes in the back of your head? When you are backing into a parking spot, being able to know where the car behind you is would save a lot of time and nervousness. If your car doesn’t have a backup camera or parking sensors, then it’s time to visit your local mobile electronics specialists. They can add these parking safety systems to almost any vehicle on the road.

Backup Camera Options

Parking SafetyThe classic backup camera system consists of a compact camera, typically about a 1-inch cube. The image produced by a backup camera covers a wide field of vision in both the horizontal and vertical planes. The image is reversed from that of a normal camera. When the camera is installed pointing rearward, this reversed image shows objects on the right side of the vehicle on the right side of the display screen. This orientation mimics what you would see in a rear view mirror.

Most cameras are water-resistant so rain, snow, mud and dust don’t affect their performance. The wiring for these cameras is also water-resistant, usually up to the first connection unless specified otherwise. That connection should be inside the vehicle.

Most good-quality cameras use wide-aperture shutters that allow the camera to capture a lot of light, even when it’s dark out. The reverse lights of your vehicle are often more than adequate to light up everything behind you. Most of these cameras are rated down to 0.5 or 1 Lux of light sensitivity. If you need to see in the dark, then there are cameras with built-in IR light transmitters. These can be used inside closed areas, like an engine compartment of a boat or the container of a delivery van.

Parking SafetyCameras can be installed at the top of or above your license plate. Some custom camera solutions are built into replacement tailgate, hatch handles and third brake light assemblies for many trucks and SUVs.

Several companies manufacture wireless camera systems. If you have a vehicle that is difficult to run wires in, then a wireless camera system may be a viable option. Just be aware that the quality of wireless cameras systems varies a great deal. The last thing you want is for an image to be full of noise, or not present at all due to interference. Wireless systems also have a small amount of delay inherent to their design. This delay can be as little as 100 mSec for some WiF-based camera systems up to almost 300 mSec for others that use more conventional AM and FM transmission techniques. You will need to work with your retailer to choose the right camera system for your vehicle.

Monitor and Display Options

Parking SafetyThere are many options for where the camera image can be displayed. Almost all aftermarket multimedia source units have dedicated rear view camera inputs and triggers. If your vehicle has a color display from the factory, several companies manufacture interfaces that allow an aftermarket camera image to be displayed on that screen. The third option is a dedicated display screen. This display can be a stand-alone monitor that is installed on the dash or in the center console, or is built into a new rearview mirror. Rearview mirror displays are a nice, clean option because nothing stands out as having been added to the interior.

Some camera systems designed for larger vehicles offer side and front camera locations as well. The monitors included with these systems can typically show all four cameras at once in a variety of on-screen configurations. The most elaborate of these systems will stitch the images from the four cameras together to provide a bird’s-eye view of what is around the vehicle. These 360-degree systems require careful calibration to work properly. Most of these multi-camera systems include reverse and turn signal triggers to automatically change which camera is being displayed.

How a Camera System Works

Parking SafetyWhen you put your transmission in reverse, a wire connected to your reverse lights or a reverse gear signal from your transmission triggers the camera system to turn on. You don’t need to press any buttons or flick any switches – it happens instantly and automatically. The camera should be installed and aligned so you can see the ground as close to the rear of your vehicle as possible.

Parking Sensor Systems

An alternative to a camera system is a parking sensor system. Instead of a camera, these systems use several ultrasonic sensors to detect the presence of objects. These sensors emit a very high-frequency signal, then measure how long it takes for that signal to bounce off an object and return to a receiving sensor built into the same small unit. These sensors are typically installed on the rear bumper of your vehicle. When installed properly, they do a great job of detecting even small objects like the post of a sign. This method of object detection is the same as what bats use for navigation.

Parking SafetyHow a parking sensor system works varies by brand. Some systems have a small display that shows you which sensor has detected an object and how far you are from that object. Most systems use a small beeper or buzzer to alert you to the presence of an object. The system will emit a beeping sound when it detects an object. The speed of the beeps increases as you get closer to the object. The warning beeps usually switch to a solid tone once you are within 12 inches of an object.

More-elaborate parking systems also include front-mounted sensors to help when driving forward into parking spot or garage.

Passive versus Active Warning Systems

Ultimately, cameras and parking sensor systems do the same job: They let you know when you are getting close to something.

One significant benefit of a parking sensor system over a camera system is that it is completely active. You don’t have to make a conscious decision to look at a screen or display to be warned of an imminent collision – the system beeps and tells you.

This isn’t to say that one system is better than the other – they simply differ in how they work. If you were trying to back a pickup truck up to a trailer, a backup camera system would be a huge benefit, while the parking sensor system just tells you there is something behind you.

The Importance of Parking Safety Systems

Here’s a chilling fact: More than 50 children are hit each week in the U.S. by a vehicle that is backing up. Sadly, roughly two of these children succumb to their injuries each week. We aren’t trying to scare you or make you paranoid – but accidents happen all the time while backing up.

If your vehicle didn’t come with a parking safety system, then drop by your local mobile electronics specialist retailer. They would be happy to inspect your vehicle and design a parking solution that meets your needs.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Backup Safety, RESOURCE LIBRARY

The Reference For Great Sound

Great SoundListening to music goes back to the dawn of man. From banging a few tree branches together to the latest computer-generated pop hit, music is a universal language that everyone can enjoy. People who put significant effort into the accurate reproduction of the music they enjoy are often called audiophiles. There is a running joke that audiophiles sometimes concentrate more on listening to the equipment they use to make great sound than to the music itself. While this so-called joke is certainly true during the purchasing and setup stage, once audiophiles have their systems sounding the way they want, the focus turns to enjoying the music.

If you get into a discussion about choosing high-end audio equipment, inevitably someone will suggest that you seek out a reference. The ultimate reference is a live performance. We want to be clear: Artists don’t make money like they used to from album sales. Supporting the performers you enjoy by attending concerts not only is great entertainment for you, but allows the performer to make a few dollars.

With this in mind, the reference for what the reproduction of a recording should sound like is not a live performance.

This article provides a generalization about most music heard on a car radio. There are exceptions; we understand that. We want you to think outside what you were once told.

How Music is Recorded

Great SoundFor most music, each musician or performer is in a recording studio. Microphones are used to capture the subsequent performance. For a singer, the mic is usually directly in front of them. For a group of singers, each individual may have a mic, or they may be gathered around a single centralized mic or a pair of microphones set up to capture the performance in stereo. For someone playing an electric guitar, the mic is most likely in front of the amplifier.

In some recording sessions, the amplifier is placed in a small room and cranked to 11 so it clips and distorts the sound, and that gets recorded. This overdriven performance gives the guitar “a certain sound” that some producers and engineers like.

Great SoundThese techniques go on and on. At the very extreme might be a drum kit. Some recording engineers have microphones on each drum and cymbal, then overhead mics to pick up rim shots and another set of mics forward of the drums to capture the room’s acoustics. Consider this as well: The sensitivity pattern of a microphone is not so narrow that it only captures what is directly in front of it, so each microphone captures information from all of the drums and cymbals, to some extent.

The specific placement of a microphone relative to the instrument it is recording has a dramatic effect on what it captures. Let’s take a look at recording an acoustic guitar. A microphone a few inches in front of the soundhole will capture significantly different information than if the mic is located halfway up the fingerboard. The question now becomes, What microphone position is correct? The next question is, If we were standing in the recording studio with the guitarist, would we hear the same thing that the microphone recorded?

The Effect of the Studio

Great SoundEach make and model of instrument has its own unique characteristic set of harmonics that gives it a “sound.” So, too, does each studio. Some are very large with acoustically absorbent surfaces. Some are very small and have a “live” sound. Placing the same performer with the same instrument in each of these studios will result in a different sound in the listening and recording position. If you haven’t seen it, watch the Foo Fighters’ documentary, “Sonic Highways.” It provides a great look at how different studios can affect the sound of a performance.

Let’s review what we have so far. For a given performance, we have a unique performer, their choice of instrument, the environment, the choice of microphone and the microphone placement that affect what we hear. We are just warming up!

The Control Room

Great SoundIn a studio, the musicians perform in what is called the live room or sometimes an isolation booth. We already know that the shape, size and finish of these rooms affect what gets recorded, but what about the control room? This is a separate room from where the performance is taking place and where the recording engineer and producer typically sit. In this room are the control console, computers to capture and process the recording, and – most importantly – monitor speakers.

In a gross and undetailed generalization, once each microphone channel has been recorded, the producer manipulates each channel to produce the final mix. This manipulation can be as simple as the left-to-right panning and level of each instrument, or as complex as equalization, compression, gating, adding distortion and much more. Often, many processes are applied simultaneously to each channel. It can take weeks or months to mix a single complex track.

We all know how different each and every set of speakers can sound. When we add the acoustics of the control room to the mix (pun intended), the number of variables increases dramatically. Listening to the same master track in two different control rooms can result in dramatically different results. This begs the question once again of what is correct, and how do we know?

Measuring and calibrating the frequency response of the monitoring speaker system will certainly help a lot, but that doesn’t account for the distortion characteristics of the speakers. Let’s say the speakers sound a little warm because the midbass driver has a resonance problem due to nonlinearities in the spider. Even a mild resonance can wreak havoc with the perceived balance of the speaker. Worse, you can’t EQ it back out. Yes, you can flatten the overall response level of the system, but if you are getting some 120 Hz content because the cone is playing 60 Hz, that can’t be removed. Lack of distortion in speakers is crucial to accurate reproduction.

Circle of Destruction?

So, we have our performers in a studio playing music. Microphones are set up in specific locations to capture that performance and the acoustics of the environment. The recording engineer is listening to what is captured by the microphones on that studio’s monitor system. The engineer makes adjustments to the mix based on what he hears. The music is then sold to the public. We listen to it on our reference systems and, if everything has gone according to plan, we enjoy it.

But what if we don’t enjoy it? What if we think what we hear doesn’t have enough bass or has too much high-frequency information? Do we make adjustments to the tone controls on our radios? Does the act of attempting to reproduce sound evolve from a scientific task to a form of art?

What about the Live Performance?

Great SoundOur friends and experts suggested that our reference for listening to music be a live performance. Is it an acoustic performance? Is it in an open-air stadium or a small club? Are any band members drunk? The number of variables that can affect what we hear is nearly infinite. Your best hope of using a live performance as a reference is to listen to a recording of that particular performance. If the recording took place anywhere else, it just might not work. Will the experience be worthwhile and enjoyable? The answer to that is a resounding yes! That performance is not our reference.

What is our Reference For Great Sound?

Great SoundFor a given performance in a given location with a specific set of instruments and microphone placement techniques, the absolute reference for what that performance should sound like would be the control room where the final mixing took place. Even if we expanded our example to a simple two-microphone recording of a choir in a massive cathedral, the recording engineer is likely to make some small adjustments, using a reference audio system or reference headphones, before that recording is released to the public.

Reproducing and listening to music is about more than just frequency response. Time response, reflections in the listening environment and much more affect what we hear. The best way to develop a reference is to listen to the same recording on as many great systems as you can. Ignore the make, model, color and cost of the equipment you are auditioning. Work to quantify the difference between what you hear and what you have heard previously.

After a while, you will start to develop a reference for what sounds good. Continue to listen. Evaluate new products, new applications and new environments. Sure, a personal preference is still involved, but that is your contribution to the art of recording and enjoying music: You can make it sound the way you want.

Your local specialist mobile electronics retailer will have many different systems you can audition. Drop by and ask to listen to a few. If they have a demo car, then definitely listen to that! Listening to music is a lot of fun – never forget that.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

  • « Previous Page
  • 1
  • …
  • 90
  • 91
  • 92
  • 93
  • 94
  • …
  • 100
  • Next Page »

Recent Articles

Memphis Car Audio Mojo MJ1212

Product Spotlight: Memphis Car Audio Mojo MJ1212

December 1, 2025 

There are hundreds of companies manufacturing car audio subwoofers these days. Most of them are “off the shelf” products built with specific logos or color schemes. As such, very … [Read More...]

Audio signals

How Audio Signals Sum Around Crossover Points

November 30, 2025 

Crossovers are an essential part of designing any audio system. From the passive designs used with a bookshelf or floor-standing speaker to three- and four-way electronic designs … [Read More...]

An amplifier and Styrofoam head

Unlocking the Secrets of Human Hearing: Understanding Weighting Curves in Audio

November 23, 2025 

Though it might surprise you, human hearing is significantly more sensitive to some frequencies than others. You can think of this phenomenon as our built-in frequency response. … [Read More...]

Two phones with arms and legs, each with boxing gloves on, facing off in front of a Kenwood car audio screen

CarPlay Sound Quality Face-Off: Wired vs. Wireless—Which Is Better?

November 16, 2025 

A reader requested that we compare the sound quality performance of wired and wireless Apple CarPlay. This is a great idea, as very little information is provided about the … [Read More...]

Customer Reviews

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Location


Get Directions to Audio Innovations

Find Us

Audio Innovations

1105 Jim's Lane
Conway, AR 72032
501-358-6545

Connect With Us

  • Facebook
  • Instagram

Services

  • Car Audio
  • Driver Safety Systems
  • Marine Audio
  • Motorcycle Audio
  • Radar and Laser Detector Systems
  • Remote Starters

Hours

Monday, Tuesday, Wednesday, Thursday, Friday9:00 am – 6:00 pm

Copyright © 2025 Audio Innovations · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...