Audio Innovations

Car Stereos, Auto Customizing, Mobile Electronics

1105 Jim's Lane, Conway, AR 72032 501-358-6545
  • Home
  • Services
    • Car Audio
    • Driver Safety Systems
    • Marine Audio
    • Motorcycle Audio
    • Radar and Laser Detector Systems
    • Remote Starters
  • About Us
  • Location
  • Customer Reviews
  • Contact Us
  • Facebook
  • Instagram
You are here: Home / RESOURCE LIBRARY / Tools of the Trade – The Digital Multimeter

Tools of the Trade – The Digital Multimeter

Digital Multimeter

Our continuing look at the tools a mobile enhancement technician should have at his or her disposal brings us to the ever-important digital multimeter. In the same way that an RTA or oscilloscope is needed to measure and quantify alternating-current signals, a high-quality multimeter is the only way to accurately quantify a DC or fixed-frequency AC signal. Read on to find out how technicians use their digital multimeters (DMM) to test the wiring in your car to make the installation process more accurate.

What Is a Digital Multimeter?

In essence, a DMM is a battery-powered, handheld device with a digital display that can perform several measurements. A DMM is occasionally (but rarely) called a Volt-Ohm-Milliammeter (VOM), giving us some insight into its capabilities. In almost every case, the meter will have between two and four terminals at the bottom for the connection of the test leads and an LCD or VFD (vacuum fluorescent display) screen at the top of the unit to show the measurement reading. Some of these displays include an analog bar graph that can be used to help detect transient signals. Finally, the function selection is made by a rotary control in the middle of the unit.

Digital Multimeter

Most units will measure direct current (DC) and alternating current (AC) voltages to either detect or quantify the presence of voltage on a terminal or wire. Meters separate the DC and AC measurements into different functions as some math needs to be applied to the AC measurement to create an RMS value. Premium meters known as True-RMS systems are more accurate when measuring AC signals outside of the 50-60Hz frequency region.

Multimeters can also measure resistance. They perform this task by feeding a very small amount of current through a device (resistor or circuit) and measuring the voltage drop across a fixed resistance value. DMMs are good at measuring resistance above an ohm or two and up to about 50 megohms. Below 1 ohm, the resistance of the cables and connections becomes an issue.

Finally, most meters can be used to measure AC and DC flow. The meters have an internal shunt resistor that is wired in series with the circuit. The voltage produced across this shunt resistor is converted to a current flow measurement. The test lead connects for current measurements are different than those for voltage and resistance readings.

Digital Multimeter
An old analog multimeter from RadioShack. While still great for some measurements, analog meters should not be used to test circuits in modern vehicles with data systems or airbag wiring.

How Technicians Use a DMM

When you are having a remote car starter, security system or even a new radio installed in your car or truck, the technician will use a multimeter to test the wires in the dash for the presence of voltage. In almost all cases, the tech needs to find a good ground, a constant power source and a switched (or accessory) source to feed and control the device.

Resistance measurements come in handy when testing speaker wires or terminals on a subwoofer enclosure to estimate the impedance of a speaker. For techs who are installing remote starters on older General Motors vehicles, they use the ohmmeter function to measure the value of the Passlock resistor in the key. It’s worth noting that the ohmmeter in a DMM can’t be used to test the suitability of a ground connection accurately. A proper grounding point should have well under 0.01 ohms of resistance.

Digital Multimeter
DMMs aren’t good at measuring very low resistances. This image shows the resistance of the test leads and connections using a good-quality Fluke digital multimeter.

Finally, taking current measurements is ideal for troubleshooting situations where car batteries are being drained. If you have a situation where your car battery is dying after a few days, the technician can measure the current being drawn from the battery to start the diagnosis and repair process.

Digital Multimeter
D’Amore Engineering in Camarillo, California, offers the AMM-1. This meter is designed specifically for car audio technicians and includes AC and DC voltage measurement, maximum and minimum DC voltage readings and incredibly accurate amplifier power measurement capabilities.

Choose the Right Mobile Enhancement Retailer

As we’ve mentioned in the past, choosing the right person to work on your vehicle is the most important aspect of the upgrade shopping process. A moderate-quality upgrade that has been installed and configured correctly will undoubtedly outperform a premium product that hasn’t been installed with care. When you tour the shop as part of your retailer interview process, make sure they have the tools required to perform the work you need. At the top of that list of tools is a quality digital multimeter.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Share this:

  • Click to email a link to a friend (Opens in new window) Email
  • Click to share on Facebook (Opens in new window) Facebook
  • Click to share on X (Opens in new window) X
  • Click to share on Pinterest (Opens in new window) Pinterest

Related

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Recent Articles

A cartoonish subwoofer drawing

An Affordable Subwoofer Upgrade Should Use a Ported Enclosure

July 13, 2025 

As we’ve mentioned many times, adding a subwoofer is one of the best upgrades you can make to a car audio system. We know that having a shop construct a custom enclosure isn’t … [Read More...]

KICKER LX1200.5

Product Spotlight: KICKER LX1200.5

July 11, 2025 

If you’ve been paying attention, then you’ll know that DSP-equipped car audio amplifiers are pretty common these days. KICKER introduced a new series of amplifiers called LX. These … [Read More...]

Compustar Pro 2WG18 LTE

Product Spotlight: Compustar Pro 2WG18 LTE

July 7, 2025 

At their heart, most remote car starters are the same. When you press a button on a wireless remote, a remote start controller integrated into the vehicle will start the engine. In … [Read More...]

A dashcam and batteries hovering over a car engine

Dashcam Battery Upgrades: Extend Parking Mode and Protect Your Vehicle

July 6, 2025 

Undoubtedly, having a dashcam in your car or truck is one of the best ways to protect yourself from false accusations. Whether you experience a hit and run or are involved in a … [Read More...]

Customer Reviews

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Location


Get Directions to Audio Innovations

Audio Innovations

1105 Jim's Lane
Conway, AR 72032
Phone: 501-358-6545

Connect With Us

  • Facebook
  • Instagram

Services

  • Car Audio
  • Driver Safety Systems
  • Marine Audio
  • Motorcycle Audio
  • Radar and Laser Detector Systems
  • Remote Starters

Store Hours

SundayClosed
Monday9:00 AM - 6:00 PM
Tuesday9:00 AM - 6:00 PM
Wednesday9:00 AM - 6:00 PM
Thursday9:00 AM - 6:00 PM
Friday9:00 AM - 6:00 PM
SaturdayClosed

Copyright © 2025 Audio Innovations · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...